Pressure Gauge

Product Details:

The SERIES 644 Industrial Pressure Transmitter is a robust transmitter designed for high accuracy pressure applications. Boasting an accuracy of ±0.05% FS RSS (<±0.25% TEB), the 644 is intended for precise measurements in the critical applications of calibration technology, hydraulic/pneumatic controls, and many more laboratory and industrial settings. The Series 644 offers multiple measurement options with two output choices (VDC or mA) and ten psig pressure ranges (optional 0 to 15 psia). The robust and compact all stainless steel Series 644 is available with either a 1/4" male NPT, or 7/16"-20 male SAE process connections. Each transmitter is provided with an 11 point NIST traceable calibration certificate.

Features:

• High accuracy provides exceptional measurement for insuring tight-control and minimizing costly out of specification conditions
• Low thermal error over a wide range of temperatures helps to insure accurate pressure measurement and process operation
• NIST calibrated to provide traceability for regulated processes where production and documentation is monitored

Specification:

• Total Error Band (Includes all thermal effects) : <±0.25% FS over entire temperature compensated range.
• Stability : <0.15% FS/year.
• Pressure Limits : Proof pressure and burst pressure
• Compensated Temperature Range : -4 to 140°F (-20 to 60°C).
• Power Requirements : 9 to 30 VDC for current output; 15 to 30 VDC for voltage output.
• Minimum Supply Voltage : Min. supply voltage (VDC) for current output = 9 + 0.02 x loop resistance Ω (loop resistance Ω = line resistance + receiver resistance).
• Response Time : <10 ms (voltage output), <80 ms (current output).
• Max Current Consumption : 4 to 20 mA: 22 mA; 0 to 10 VDC: 20 mA.
• Electrical Connections : 3 ft cable or 6-pin male bayonet connector.
• Process Connection : 1/4" male NPT or 7/16"-20 male SAE with O-Ring.

Applications:

• Calibration equipment
• Test benches
• Pulp and paper mills
• Hydraulic/pneumatic controls
• Transportation
• Power generation

Additional Information:

• Item Code: Series-644

Product Details:

The SERIES 681 Sanitary Pressure Transmitter is designed to meet 3A standards for applications in food, dairy, beverage and pharmaceutical processing, liquid level control, and sanitary pipelines. The unit is fully sealed to withstand high pressure wash-down in Clean-in-Place (CIP) and Sterilize-in-Place (SIP) installations. The Series 681 is designed with a unique, no liquid fill diaphragm and a Sanitary Clamp pressure fitting for easy installation with negligible clamping effect. A conduit fitting, shielded cable with vent tube and sealed screws for zero and span adjustment combine to make the Series 681 completely watertight.

Features:

• Fully sealed to withstand Clean-in-Place and Sterilize-in-Place installations supports regulatory conditions for sanitary processes
• Sanitary clamp fitting makes for easy installation

Specification:

• Accuracy : ±.20% FS (includes non-linearity, hysteresis and non-repeatability).
• Temperature Limits : -40 to 260°F (-40 to 125°C) 10 to 90% RH, non-condensing.
• Thermal Effect : Zero and span shift: ±2.0% FS/100°F (% FS/50°C).
• Zero and Span Adjustment : ±0.5 mA, non-interactive.
• Response Time : ≤10 ms.
• Electrical Connections : 1/2" conduit fitting and strain relief with 15 ft (4.5 m) cable.
• Pressure Connection : 2" or 1-1/2" Sanitary Clamp fitting male NPT .
• Clamping Effect : Zero and span shift: ±0.15% FS for ranges up to 30 psi; ±0.25% FS for ranges >30 psi.

Applications:

• Sanitary process applications
• Food and beverage processing
• Water processing
• Dairy processing
• Pharmaceutical processing

 

Other Details:

 

Additional Information:

• Item Code: Series-681

Product Details:

The SERIES FDT Flush Diaphragm Transmitter is designed for highly cyclical conditions. Flush sensor feature prevents any potential inaccuracies due to build-up or blockage which is a typical problem found in most non-flush transmitter sensors.

Features:

• Performs well in high cyclical environments with the presence of water-hammering or spiking for long service life

Applications:

• OEM
• Hydraulic systems
• Process systems

 

Other Details:

• Service : Compatible liquids and gases, adhesives, slurries, materials that can harden, or where a pressure cavity is not desired.
• Wetted Materials : 316 & 15-5 SST.
• Accuracy : ±0.5% FS (includes non-linearity, hysteresis, and repeatability).
• Thermal Effect : ±1.5% FSO over compensated range.   
• Output Signal : FDT-A: 4-20 mADC; FDT-V: 0-5 VDC.
• Response Time : <1 mS.
• Loop Resistance : FDT-A: 0-1.5 ohms; FDT-V: ≤100 ohms.
• Process Connection : 7/16-20 UNF male flush diaphragm. Optional 1/4" male NPT.
• Mounting Orientation : Mount in any position.

Additional Information:

• Item Code: Series-FDT

Product Details:

The SERIES IWP Pressure Transmitter provides an exceptional value solution to pressure measurement in industrial conditions requiring high-performance, stability and long service life. The precise operation under dirty and wet conditions, make the Series IWP an ideal choice for petroleum, chemical and metallurgical industry applications.

Features:

• Rugged, weather-proof design supports use in harsh environments
• 4 digit LED display and 4 to 20 mA output
• Durable cast-aluminum shell securely protects the high-quality circuitry from harsh industrial surroundings
• Long-term stability and reliability in environmentally challenging conditions
• Built for industrial processes such as petroleum, chemical and metallurgy but at a value price-point compared to other similar products.

Applications:

• Harsh industrial environments
• Process
• Chemical
• Petroleum
• Metallurgical

 

Other Details:

 

Additional Information:

• Item Code: Series-IWP

Product Details:

The Dwyer SERIES IS626 Intrinsically Safe Pressure Transmitter can be used to accurately measure compatible gases and liquids compatible with its 316/316L Stainless Steel wetted parts. Series IS626 full scale accuracy is 0.25%. Designed for industrial environments with a NEMA 4X (IP66) housing, this transmitter resists most effects of shock and vibration. Models are available with a 3' cable or M-12 4 pin connection.

 

The IS626 is UL listed for use in Hazardous (Classified) Locations. The protection method is by Intrinsic Safety,"ia". It was investigated by UL under UL Standard 913 Sixth Edition and CSA Standard No. 157-92.

 

Features:

• Exceptional accuracy for insuring tight-control and minimizing costly out of specification conditions
• Loop Resistance : 0 - 900 Ω maximum.
• NEMA 4X rated enclosure provides protection in harsh environments permitting outdoor monitoring or in areas where dust and particulate matter exists
• Robust sensor provides shock and vibration resistance insuring stability in controlling pressure for process applications
• Accuracy : 0.25% FS; absolute range: 0.5% FS (includes linearity, hysteresis, and repeatability).
• Thermal Effect : ±0.02% FS/°F (includes zero and span).

 

Applications:

• Monitoring pressure in hazardous environments
• Process

 

Other Details:

 

Additional Information:

• Item Code: Series-IS626

Product Details:

Replace your outdated analog gages with the new SERIES DPG Digital Pressure Gage. The Series DPG has a high ±0.25% or ±0.5% full-scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. Series DPG is battery powered and has an auto-shut off to conserve battery life. Battery life, on average, will last 2000 hours. A 4 button key pad allows easy access to features without the need to work through complex menus or difficult key combinations. These features include backlight, peak and valley, tare or auto zero and conversion of the pressure units.

Features:

• High accuracy provides exceptional measurement minimizing costly out of specification conditions
• Backlit 4-digit display provides clear parallax-free reading reducing potential for errors
• Battery-powered gage with auto-shutoff eliminates wiring and prolongs battery life reducing service calls
• Push-button zero reduce installation and service time

Specification:

• Service : Compatible liquids and combustible gases (for FM listing see Agency Approvals below).
• Wetted Materials : Type 316L SS.
• Housing Materials : Polycarbonate front and back cover, anodized aluminum extruded housing with recessed grooves, polycarbonate overlay, Buna-N O-rings, 316L SS sensor construction.
• Accuracy : DPG-000: 0.5% FS; DPG-100: ±0.25% FS; ±1 least significant digit @ 70°F (21°C) (includes linearity, hysteresis, repeatability).
• Pressure Limit : 2x pressure range for models ≤1000 psi; 5000 psi for 3000 psi range; 7500 psi for 5000 psi range.
• Thermal Effect : Between 70 to 130°F is 0.016%/F. Between 32 to 70°F is 0.026%/F. Between 10 to 32°F is 0.09%/F. Between 0 to 10°F is 0.50%/F.
• Power Requirements : (2) AAA alkaline batteries, included, user replaceable.
• Battery Life : 2000 hours typical; Low battery indicator. (60 hours in continuous use).
• Auto Shut-Off : Gage: 60 minute auto shut-off. Auto shut-off may be disengaged. Backlight: 2 minute auto shut-off.

Applications:

• Process applications
• Replacement for legacy analog gages
• OEM applications

Additional Information:

• Item Code: Series-DPG

Product Details:

Series SGA Gages are perfect for applications where resistance to corrosion is necessary. The stainless steel case and ring offer excellent protection from harsh processes and the gage can be easily filled in the field for vibration or pulsation applications. The SGA gages are an economical choice where ambient corrosion and vibration are a concern. Also, this line is suitable for all fluids that are compatible with brass.

Other Details:

Additional Information:

• Item Code: Series-SGA

Product Details:

The Model BDG-01 Brass Digital Pressure Gage measures gas pressure with ± 0.5% of full-scale accuracy at an affordable price. With brass wetted material, the series BDG is designed for your specific applications of compatible gases. Its design allows for easy installation. User-selectable units of measure let one gage be used for various pressure scales.

Features:

• Brass wetted materials for use with compatible gases
• Backlit display provides easy viewing of gage measurement
• Selectable units provide readings in easily recognizable units for user
• Well-suited gage for application designs specifying simple operation and accuracy
• Rugged weatherproof enclosure enables a range of use outdoor or indoor where water is present

Applications:

• Pneumatic
• Draft measurement
• Filter monitoring
• Industrial
• Outdoor
• HVAC roof-top
• Flow

 

Other Details:

Operation:
To turn on the gage, press ON/Off . This button also allows you to scroll through the units, which are located on the right side of the display. To reset zero, press and hold Reset for 2 seconds until display re-zeros. Press and hold ON/Off for 2 seconds to turn off the gage.

Calibration:
To ensure accurate pressure readings, be sure to zero gage before first use. This eliminates readings to any change in atmospheric pressure. Only zero gage while it is disconnected from any fitting. It is also recommended to re-zero the gage once a year.

Battery Removal:
If the battery is low, the display will show “Lob” and turn off after 3 seconds. To replace the battery, unscrew the plastic cover on the top of the gage housing. Then remove the battery and replace with a new one. Make sure the (+) and (-) polarities

Maintenance/Repair:
Upon final installation of the Model BDG no routine maintenance is required. The Model BDG is not field serviceable and should be returned if repair is needed. Field repair should not be attempted and may void warranty.

Warranty/Return:
Refer to “Terms and Conditions of Sales” in our catalog and on our website. Contact customer service to receive a Return Goods Authorization number before shipping the product back for repair. Be sure to include a brief description of the problem plus any additional application notes.

Additional Information:

• Item Code: Model-BDG-01

Product Details:

The SERIES DPGA is the only economic digital pressure gage with selectable engineering units on the market. With its 1% accuracy and digital push-button zero, the DPGA is the perfect choice for digitally monitoring the pressures of air and compatible gases.

Features:

• Push-button zero reduce installation and service time
• High accuracy provides exceptional measurement for minimizing costly out of specification conditions
• Selectable unit button provides reading in easily recognizable units
• Well-suited gage for compatible gas (DPGA) or liquid (DPGW) applications specifying simple operation and accuracy
• Service : DPGA: air and compatible gases; DPGW: liquids and compatible gases.
• Wetted Materials : DPGA: 316L SS, silicone sensor; DPGW: 316L SS.

Applications:

• Process applications
• Process start-up
• OEM applications

 

Other Details:

Operating Instructions:

• For complete instructions on the two button operation see the flow chart provided on back.
• On/Off : Press ON/OFF to toggle on and off. Device will automatically shut off after 20 minutes if not used.
• Zero: Zeros the display - Push & hold for 2 seconds to zero the display. If after pressing zero the display does not re-zero, the unit is no longer meeting specified accuracy and should be sent back to the factory for calibration. Do not use the zero button when pressure is applied.
• Units : To change units, press both On/Off and Zero buttons simultaneously.
• Overpressure Indicator : The LCD will flash “OFL”, if the pressure applied is over 105% F.S.

Installation:
When installing gage always use 1 ?? hex at the base of the housing to tighten the gage to a mating fitting. Do not apply wrench to housing.

Maintenance:
Battery Removal: Remove the screw on backplate. Lift backplate off by hand. To reassemble replace backplate and screw

Additional Information:

• Item Code: Series-DPGA-DPGW

Product Details:

The SERIES DCGII Digital Calibration Pressure Gage offers a complete pressure gage with calibration capabilities. With a precise 0.05% full scale accuracy and large 5 digit resolution, this gage can be used in critical industrial applications where precision is most important. This versatile gage only requires one 9V battery or power adapter and can operate up to 5,000 working hours. The Series DCGII 0.05% Digital Pressure Gage can display percent of range, pressure swings or alarm set points. This pressure gage comes complete with eleven selectable pressure units, backlight and zeroing capability.

Features:

• Indicator can display percent of range, pressure swings or alarm set points
• Minimum and maximum peak detection
• Selectable 10, 20, or 30 second backlight
• Temperature indication
• Eleven selectable pressure units
• Stainless steel 1/2" male NPT connection
• Highest accuracy provides exceptional measurement for calibration minimizing costly out of specification conditions
• Stainless steel housing resists ambient corrosion for longer service life in harsh environments
• Lightweight and slim, yet large easy to read battery-powered gage make them easy to carry and read
• Specified with high ambient temperature rating means more robust uses and longer service-life
• Indicator can display pressure swings, minimum and maximum peak detection with alarm set points provides a multipurpose tool where critical calibration is needed
• Other Materials:Housing: Aluminum alloy; Display: Acrylic MR200; Buttons: Silicon gel; Back plate: 304 SS; Back seal: Oil-proof latex.

Applications:

• Field gage calibration
• Permanent installation
• Burst disc testing
• Torque data logging
• Pressure regulator testing and hydrostatic leak testing

 

Other Details:

Additional Information:

• Item Code: Series-DCGII

Product Details:

Low cost and precision made, the SERIES A1F Pressure Switch is ideal for OEM industrial applications. Wetted materials of 316 SS and fluorocarbon ensure great chemical compatibility with a wide range of process media. The open case style is perfect for panel mounting applications like pump skids. Weatherproof enclosure is available in polycarbonate offering a low cost weatherproof switch. Superior 15 A contact allows direct control of motors or pumps without the use of external relays, a true cost savings.

Features:

• 15 A contact allows direct control reducing costs and reliability by having to introduce additional contacts and relays
• Case style allows use for panel mounting application with optional weather-proof enclosure for use in outdoor environments
• Field adjustable reduces installation time bring application on-line faster
• Wetted material provides support for wider range of process media

Specification:

• Service : Compatible liquids and gases.
• Wetted Materials : Pressure Chamber: 316 SS; Diaphragm: Fluorocarbon.
• Enclosure Rating : No rating for open construction. Installed properly within an optional enclosure meets NEMA 4X standards.
• Electrical Rating : 15 A @ 120/240/480 VAC, 1/8 HP @ 125 VAC, 1/4 HP @ 250 VAC.
• Electrical Connection : Screw terminals.
• Mounting Orientation : Within 20° of vertical.
• Set Point Adjustment : Knurled screw cap with indicating scale.
• Deadband : Fixed, see products on Order page for minimum and maximum deadband.

Applications:

• OEM
• Compressors
• Motor control
• Process equipment
• Pump control

 

Options:

• Weatherproof Enclosure. Optional enclosure factory installed. To order change "O" to "PC". Example: A1F-PC-SS-1-1.

 

Other Details:

Additional Information:

• Item Code: Series-A1F

Product Details:

Series A6 Durable Pressure Switches have been specifically designed to stand up to extended duty applications. These switches are constructed with a polyimide film diaphragm and are compatible with a variety of fluids. For ease of installation, the switches come with a 1/4" male NPT process connection and can be mounted in any orientation. The Series A6 pressure switches are compact and have great set-point integrity, and feature simple, easy set-point field adjustment.

Features:

• High switch cycle means long life for extended duty applications
• Mounting in any position and feature simple makes a reliable switching for equipment and OEM applications

Specification:

• Pressure Limits : Operating Pressure: 150 psi (10.3 bar) for 0.5-24 psi set point ranges, 250 psi (17.2 bar) for 25-150 psi set-point ranges. Proof Pressure: 500 psi (34.5 bar). Burst Pressure: 750 psi (51.7 bar) for 0.5-24 psi set point ranges, 1250 psi (86.2 bar) for 25-150 psi set point ranges.
• Switch Type : 1 SPST NO, 1 SPST NC. NO and NC switch independent from each other.
• Electrical Ratings : Resistive: 15 A @ 6 VDC, 8 A @ 12 VDC, 4 A @ 24 VDC; Inductive: 1 A @ 120 VAC, 0.5 A @ 240 VAC.
• Mounting Orientation : Switch can be installed in any position.
• Set Point Adjustment : Screw.

Applications:

• OEM
• Process equipment
• Process applications

 

Other Details:

 

Additional Information:

• Item Code: Series-A6

Product Details:

Designed for OEM applications, the Series A2 Subminiature Pressure Switch is economical and is equipped with high proof pressure capabilities for demanding applications. The A2 is available with either spade terminals or flying leads (submersible). Switches with spade terminals can be easily adjusted in the field.

Features:

• High-proof pressure means capable to meet application demands
• Easy to adjust switches means shorter install and service times

Other Details:

Additional Information:

• Item Code: Series-A2

Product Details:

The Mercoid® SERIES 3200G Smart Pressure Transmitter is a microprocessor-based high performance transmitter, which has flexible pressure calibration, push button configuration, and programmable using HART® Communication. The Series 3200G is capable of being configured with the zero and span buttons, a field calibrator is not required for configuration. The transmitter software compensates for thermal effects, improving performance. EEPROM stores configuration settings and stores sensor correction coefficients in the event of shutdowns or power loss. The Series 3200G is FM approved for use in hazardous (Classified) locations. The 100:1 rangeability allows the smart transmitter to be configured to fit any application.

Features:

• Completely configurable using zero/span buttons (no calibrator required)
• Automatic ambient temperature compensation
• Fail-mode process function

Specification:

• Service : Compatible gases, steam, liquids or vapors.
• Accuracy : ±0.075% FS (@ 20°C).
• Rangeability : 100:1 turn down.
• Temperature Limits : Process: -40 to 248°F (-40 to 120°C); Ambient: Without LCD -40 to 185°F (-40 to 85°C), With LCD -22 to 176°F (-30 to 80°C).
• Thermal Effect : ±0.125% span/32°C.
• Output Signal : 4 to 20 mA / HART® Communication.
• Loop Resistance : Operation: 0 to 1500 Ω HART® Communication: 250 to 500 Ω.
• Electrical Connection : Two 1/2" female NPT conduit, screw terminal.
• Enclosure Rating : NEMA 4X (IP66) and explosion-proof for Class I, Div I Groups A, B, C and D.

Applications:

• Water and wastewater
• Chemical and petrochemical
• Pulp and paper
• Oil and gas
• Food and beverage

 

Other Details:

Additional Information:

• Item Code: Series-3200G

Product Details:

SERIES DA/DS are the best pressure switches made. The Mercoid DA/DS Series is one of the world’s broadest lines of pressure switches. The DA/DS Series has extremely high sensitivity and great repeatability. The DA Models are equipped with two external adjustments, one for setting high pressure operating point, the other for setting low pressure operating point. Deadband, the difference between high and low setpoints, is adjustable over the full-scale. The DS Models are equipped with a single external adjustment for setting operating point only. For mercury-free switches, choose between the snap action switch or hermetically sealed snap action switch. Hermetically sealed mercury switch also available.

Features:

• Visible calibrated dial provides an easy and fast check without having to open device causing dangerous conditions to operators
• On/off indication (except hermetically sealed snap switch models) gives operator clear indication of state of switched equipment that could be located in another location
• Adjustable or fixed deadband supports control applications by reducing equipment wear-out by unnecessary recycling
• External switch setpoint adjustments reduces set-up time
• Pressure ranges of full vacuum to 8000 psig gives application designers the ability to specify standard equipment, simplifying install and training, and reducing servicing costs
• UL listed, CSA approved many models FM approved to support rigorous process applications and regulations
• General purpose, weatherproof or explosion-proof enclosures for a variety of indoor or outdoor environments meeting the needs of multiple applications and uses

Specification:

• Pressure Limit : Maximum pressure of the operating range.
• Enclosure Rating : General purpose, weatherproof or explosion-proof.
• Repeatability : ±1% of full operating range, ±1.5% on DS-7300 models.
• Switch Type : SPST mercury switch, SPDT mercury switch, SPDT snap switch, or SPDT hermetically sealed snap switch. Other circuit types available.
• Conduit Connection : General purpose: 1/2" hole for conduit hub. Weatherproof: 1/2" conduit hub. Explosion-proof: 3/4" female NPT.
• Process Connection : General purpose and weatherproof: 1/4" male NPT; 1/2" male NPT on range 15S and 16S. Explosion-proof: 1/2" male NPT and 1/4" female NPT.
• Set Point Adjustment : Thumbscrew.
• Weight : General purpose: 4 lb (1.8 kg). Weatherproof: 6 lb (2.7 kg). Explosion-proof: 8 lb (3.5 kg).

Applications:

• Compressors
• Mechanical HVAC or process equipment
• Pump control

Options:

• Explosion-proof Enclosure (Series DAH): Suitable for Class I, Groups C and D; NEMA 7; Class II, Groups E, F, G; Class III NEMA 9 and 9A, Division 1. Add "H" to model number after DA or DS. Example: DAH-31-153-7.
• FM Approved: For general purpose and explosion-proof models see Agency Approvals on Specification page.Add "F" to model number after DA, DS, DAH or DSH. Examples: DAF-31-153-7 or DAHF-31-153-7.
• Other Options (consult factory): DPDT switches or other switch types, fixed deadband mercury switch units for low deadband applications, manual reset operation, two-stage operation, acetal bushed movement for applications with high amounts of vibration and/or pulsation, fungus proofing, siphon, diaphragm seals, mounting flange and remote connection.
• Weatherproof Enclosure (Series DAW): Add "W" to model number after DA or DS and change 1 to 3. Example: DAW-33-153-7.

Additional Information:

• Item Code: Series-DA-DS

Product Details:

SERIES DSGT Digital Indicating Transmitter is a versatile multi-function process gage that features an excellent 0.25% full scale accuracy. This all-in-one digital gage package is designed to reduce installation costs, instrument cost, and save space where an application requires a gage, transmitter, and switches. The Series DSGT gage comes standards with a loop-powered 4-20 mA transmitter output and is offered with one or two optional SPDT switches.

 

The Series DSGT gage is housed in a durable fiberglass reinforced thermoplastic case that is designed to meet NEMA 4 (IP65) requirements. The gage features a menu-driven display for easy customization. User selectable features include 12 engineering units of measure, password protected calibration and disable functions, as well as an adjustable bar graph and update/dampening rates.

 

Features:

• All-in-one digital gage package is designed to reduce installation costs, instrument cost, and save space where an application requires a gage, transmitter, and switches
• Durable fiberglass reinforced thermoplastic case to meet NEMA 4 (IP56) requirements supports use in harsh environments
• Password protected calibration and disable functions helps to insure no errors by untrained personnel

Specification:

• Service: Compatible, non-combustible liquids & gases.
• Wetted Materials : 17 to 4 stainless steel sensor, 316 SS socket.
• Housing Materials : Fiberglass reinforced thermoplastic case.
• Accuracy : 0.25% FS (includes linearity, hysteresis, repeatability).
• Memory Back Up Supply : (2) C alkaline batteries, installed functional, user replaceable.
• Electrical Connections: 3 ft flying leads.
• Loop Resistance : DC 0 to 1090 Ω max.
• Set Point Adjustments : Adjustable through menu selections.

Applications:

• Process
• Compressor
• Outdoor
• OEM

Additional Information:

• Item Code: Series-DSGT

Product Details:

The SERIES 672 Low Pressure Transducer is a perfect solution to any application where a very accurate low pressure transducer is necessary. Using variable capacitance technology, the Series 672 is designed to measure pressures as low as 10 in w.c. up to 400 in w.c., very low ranges for a single connection pressure transducer. The 672 also features a 0.25% F.S. accuracy. Use the Series 672 in liquid level, flood warning, waste water, clean room, and open channel flow applications.

Features:

• Low range high accuracy provides precise control for process applications

 

Specification:

• Accuracy : ±0.25% F.S. (RSS). Includes non-linearity, hysteresis, and non-repeatability.   
• Pressure Limits : 29 psi (2 bar) for up to 85" w.c. (0.2 bar) ranges; 58 psi (4 bar) for 85" to 140" w.c. (0.2 to 0.35 bar); 73 psi (5 bar) for 141" to 400" w.c. (0.35 to 1 bar).
• Thermal Effects : Zero: 1.0%F.S./100°F (2.0%F.S./100°C); Span: 1.0%F.S./100°F (2.0%F.S./100°C).
• Power Requirements : 4-20 mA: 9-35 VDC; 0-5 VDC: 7.5-35 VDC.
• Output Signal : 4-20 mA (2-wire) or 0-5 VDC (3-wire).
• Zero & Span Adjustment : ±10% F.S. each (by Potentiometer).
• Max Loop Resistance : 1.325 kΩ.
• Electrical Connections : Large DIN 43650 connector with mating plug.

 

Applications:

• Liquid level
• Flood warning
• Waste water
• Clean room
• Open flow applications

 

Other Details:

 

Additional Information:

• Item Code: Series-672

Product Details:

Reliable and convenient, the Series AP Diaphragm Operated Pressure Switch is a compact switch for instrument air or other low pressure applications. Visible set point and external adjustment add convenience. Used on air, non-corrosive gas or liquid service compatible with wetted parts. Units are available in weather-proof and explosion-proof housing.

Features:

• Explosion-proof and weatherproof housing provides device protection for outdoor use or harsh environment operation
• External switch set point adjustment reduces set-up time

Speciication:

• Wetted Materials : Nylon reinforced Buna-N and steel. PTFE and 316 SS optional.
• Enclosure Rating : General purpose. Weatherproof and explosion-proof optional.
• Switch Type : SPDT mercury switch or SPDT snap switch. Other switch types available.
• Electrical Rating : Mercury switch: 4 A @ 120 VAC/DC, 2 A @ 240 VAC/DC. Snap switch: 15 A @ 120 VAC, 8 A @ 240 VAC, 0.5 A @ 120 VDC, 0.25 A @ 240 VDC.
• Electrical Connections : Screw terminal.
• Mounting Orientation : Vertical for mercury switch models, any position for snap switch models.
• Set Point Adjustment : External screw.

Applications:

• Low pressure applications
• Instrument air

 

Other Details:

Additional Information:

• Item Code: Series-AP

Product Details:

The SERIES SGX/SGF Gages have dual English/metric scales with ±1.6% full scale accuracy. The Series SGX/SGF gages are designed with 304 SS housings and brass or 316 SS wetted parts. Ranges of vacuum, compound and pressures to 235" w.c. are available. Included on the dial is a convenient zero adjustment screw which allows the user to easily re-zero the needle.

Features:

• Stainless steel housing and wetted parts resist ambient corrosion for longer service life in harsh environments
• High accuracy gage for applications requiring more precise measurement
• Models that support vacuum to higher pressure ranges provide a selection to meet specific applications
• Specified with high ambient and process temperature ratings mean more robust uses and longer service-life
• Field adjustable zeroing screw simplifies installation and calibration
• Accuracy : ±1.6% FS on positive pressure ranges 15 in w.c. & greater; ±2.5% FS on all other ranges.

Applications:

• Pneumatic
• Draft Measurement
• Filter Monitoring
• Liquid Level

 

Other Details:

Additional Information:

• Item Code: Series-SGX-SGF

Product Details:

SERIES EDA Electronic Pressure Control is an extremely versatile compact package that can replace a separate gage, two switches, and a transmitter in a system saving money, installation time, and panel space. The EDA incorporates two SPDT relays that have the on and off points fully adjustable over the range for control or alarm use. Front face has LED indicators for switch status and a large backlight two-line display showing process value and indication units. Programming is easy with simple menu structure, two-line display, and external programming buttons. Weatherproof housing is ideal for a wide variety of applications with panel mount, flush mount, or pipe mount ability. Features include zero set, adjustable dampening, menu lock out, peak and valley indication, removable terminal blocks, adjustable time delay, and scalable transmitter output.

Features:

• Display Units: psi, kg/cm², bar, in Hg, ft w.c., kPa, MPa, %FS, in w.c., mbar, cm w.c., mm Hg, or oz/in² (choices depend on range).
• Test Mode: Simulates input over the range without pressuring to easily test switches and transmitter output feature.
• Fail-safe: For sensor failure, over pressure, high temperature limit, low temperature limit, or keypad short. User chooses if relay is de-energized, energized, or no action. With transmitter option, user chooses an output of 3.6 mA 22 mA, or no action.
• Alternation: Selectable alternation of set points between the relays for even wear on duplex pump applications.
• Versatile Compact Package: Can replace a separate gage, two switches, and a transmitter in a system saving, money, installation time, and panel space.
• Fully Programmable: To meet simple or complex application needs.
• Weatherproof Housing: Ideal for a wide variety of applications with panel mount, flush mount, or pipe mount ability.

Specification:

• Service : Compatible liquids and gases.
• Accuracy : ±1% of FS including linearity, hysteresis, and repeatability (indicator and transmitter).
• Stability : < ±2% of FS per year.
• Temperature Limits : Ambient: 20 to 140°F (-6.6 to 60°C); Process: 0 to 176°F (-18 to 80°C).
• Compensated Temperature Limits : 32 to 122°F (0 to 50°C).
• Thermal Effect : ±0.05% of F.S./°F.
• Electrical Connections : Removable terminal blocks with two 1/2" female NPT conduit connections.
• Warm Up Time : <10 seconds.
• Mounting Orientation : Any position.

Applications:

• Process control
• Compressor control
• SCFM duct flow
• Filter status
• Duct or building static pressure
• Damper and fan control

Additional Information:

• Item Code: Series-EDA

Product Details:

The Series LPG5 Low Pressure Gages offer top of the line performance for pressure applications from 10 in. w.c. to 10 psi. The LPG5 gages possess dual scales with 3-2-3% full-scale accuracy on a 2.5" dial. Units are made with a chrome plated steel housing and brass wetted parts. Units can withstand temperatures of -4 to 140°F (-20 to 60°C). This series is meant for the measurement of low pressures of gases and liquids and is ideal for air flow indication, liquid level and draft measurement. Series LPG5 gages are available with either a bottom or back connection option.

Features:

• Chrome plated steel housing and brass wetted parts resist ambient for longer service life in harsh environments
• Low pressure gage provides a selection to meet specific applications
• Specified with high ambient and process temperature ratings mean more robust uses and longer service-life
• Good accuracy gage for value-sensitive applications requiring more precise measurement and where vibration is a concern

Applications:

• Air flow indication
• Liquid level
• Draft measurement

Other Details:

 

Additional Information:

• Item Code: Series-LPG5

Product Details:

The Series WDG Weatherproof Digital Pressure Gage measures gas and liquid pressure with high accuracy at an affordable price. It’s rugged weatherproof design stands up to outdoor and industrial environments. The 4-digit backlit display with four selectable units makes readings easily visible to prevent reading errors. The WDG comes with 304L stainless steel wetted material for a wide range of compatible liquids and gases.

We are in the process of discontinuing this series, the suggested replacement is Series DPGA/DPGB.

 

Specification:

• Accuracy : ±0.5% FS for ranges up to 1000 psig (68.94 bar); ±1% FS for 5000 psig (344.74 bar) range.
• Power Requirements : 3 V Lithium metal battery, installed functional, user replaceable

Applications:

• Pneumatic
• Draft measurement
• Filter monitoring
• Industrial
• Outdoor
• HVAC roof-top
• Flow

 

Other Details:

 

Additional Information:

• Item Code: Series-WDG

Product Details:

Miniature SERIES APS/AVS Adjustable Switches offer reliable switching for pressure/vacuum alarm, shutdown or control. The units are readily adjustable throughout their range using the locking adjusting ring and indicating pointer. The body is constructed of stainless steel for durability in harsh environments. Switches include 12" (30 cm) wire leads sealed with epoxy for additional protection.

Features:

• Field adjustable with simple indicating pointer reduces installation time bringing application on-line faster
• Stainless steel construction provides a durable solution in harsh environments

Applications:

• OEM
• Compressors
• Motor control
• Process equipment
• Pump control

 

Model Range:

• APS-150 - Decreasing: 0.8 to 28.5 psi (0.06 to 2.0 bar) Increasing: 1.6 to 30.0 psi (0.11 to 2.1 bar) (APS only)
• APS-250 - Decreasing: 2.0 to 48.0 psi (0.14 to 3.3 bar) Increasing: 3.0 to 50.0 psi (0.21 to 3.5 bar) (APS only)
• APS-350 - Decreasing: 3.0 to 96.5 psi (0.21 to 6.7 bar) Increasing: 4.5 to 100 psi (0.31 to 6.9 bar) (APS only)
• APS-450 - Decreasing: 7.5 to 242 psi (0.52 to 16.7 bar) Increasing: 9.7 to 250 psi (0.67 to 17.2 bar) (APS only)
• APS-550 - Decreasing: 15.0 to 485 psi (1.0 to 33.4 bar) Increasing: 20.0 to 500 psi (1.4 to 34.5 bar) (APS only)
• AVS-150 - Decreasing: 1.6 to 27.1 psi (4.1 to 68.6 bar) Increasing: 2.7 to 28.2 psi (6.9 to 71.6 bar) (AVS only)
• AVS-250 - Decreasing: 4.0 to 24.8 (10.2 to 63.0 bar) Increasing: 5.1 to 28.2 psi (13.0 to 71.6 bar) (AVS only)
• AVS-350 - Decreasing: 6.0 to 21.5 psi (15.2 to 54.6 bar) Increasing: 8.4 to 28.2 psi (21.3 to 71.6 bar) (AVS only)

 

Additional Information:

• Item Code: Series-APS-AVS

Product Details:

Compact, lightweight, and adjustable, the SERIES MVS Miniature Vacuum Switch is specially designed for OEM applications. This low cost switch has a minimum life expectancy of 10 million cycles and has an extremely fast response time. Typical applications for the MVS are HVAC, home appliance, dairy systems, medical, office equipment, and pump control.

Features:

• High switch cycle means long life for extended duty applications

 

Specification:

• Electrical Rating : Range 3 to 8" w.c.: 3 A, 125/250 VAC; Range 9 to 80" w.c.: 10 A, 125/250 VAC; Range 81 to 330" w.c.: 15 A, 125/250 VAC.
• Contacts : Silver with brass terminals.
• Electrical Connections : Terminals - 0.187" x 0.20: spade for use with quick disconnects.
• Process Connections : Models MVS-1 to MVS-3: Smooth port 0.25" diameter; Models MVS-4 to MVS-6: 1/8" male NPT.
• Mounting : Use 2 screws through eyelets.   

 Applications:

• OEM
• HVAC applications
• Medical equipment
• Dairy equipment
• Pump control

Other Details:

 

Additional Information:

• Item Code: Series-MVS

Product Details:

The SERIES CXA Water Pump Pressure Switches have been proven reliable for controlling automatic water systems. These switches are very popular for use on water well pumps and pumping systems. The set point and deadband are both easily adjustable via screws inside the cover. For ease of installation, the switches come with a 1/4" female NPT process connection and can be mounted in any orientation. The series CXA's simple design makes it a great switch for an installer at any skill level.

Features:

• The set point and deadband are both easily adjustable reducing time to install and operation
• Mounting in any position and feature simple makes a reliable switch that can be installed by any skill level

Specification:

• Service : Compatible liquids and gases.
• Electrical Ratings : 20 A @ 120 VAC, 12 A @ 240 VAC, 9.6 A @ 240 VAC (3 phase), 8.6 A @ 32 VDC, 3.1 A @ 120 VDC, 1.6 A @ 240 VDC.
• Electrical Connections : Screw terminal.
• Mounting Orientation : Switch can be installed in any position.
• Set Point Adjustment : Internal screws.

Applications:

• Water system applications
• Electric water pumps
• Well pumps
• Pumping systems

 

Other Details:

 

Additional Information:

• Item Code: Series-CXA

We are the Leadeding supplier of Dwyer Pressure Guage and we supply it.